The Top 5 Reasons People Thrive In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to source some plastic spacers to aid the new pane in being able to fit properly into the window frame.

If you plan attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need to open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you aren't able to move the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close your window and do an initial test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer can be applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is related to the seal, not the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with the breeze. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. You can check this by checking for the arrows on each hinge, this shows which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges, also due to wear and tear could become misaligned. This can cause an opening to appear where the sash meets the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it is possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals, these can become worn down or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc click here will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to replace them than to repair them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.